Hyline Offroad JK CRAWLER FRONT BUMPER User Manual
Proudly made in, Parts list, Tools needed
T:\Hyline Offroad, LLC\Installation Instructions\400.100.110-JK STANDARD FRONT BUMPER\400.100.110 Installation Instructions.doc
Page 1 of 5
REV 4 02/23/12
Proudly Made In
USA
Installation Instructions:
JK Standard & Crawler Front Bumper
Part Number:
400.100.11
0 & .120
Vehicle Fitment:
2007 - Present Jeep Wrangler &
Unlimited
Parts List
Qty:
1 Standard Front Bumper
1 Winch Plate
2 Left & Right Bumper
Mounting Brackets
1 2012 & Newer Bracket
8 8-32 Lock Nuts
8 8-32 Flat Washers
6 7/16-20 Grade 8 Bolts
14 7/16” Lock Washers
18 7/16” Flat Washers
12 7/16-20 Grade 8 Nuts
2 7/16-20 Weldnut Tabs
Tools Needed
Ratchet
18mm Deep Socket
6” Extention
11/16” Deep Socket
5/8” Socket
11/32” Deep Socket
Torque Wrench
5/8” Wrench
Phillips Screwdriver
Congratulations on your purchase of the Hyline Offroad Standard Front Bumper. Our Bumpers are
completely manufactured in our facility located in Perkasie, PA. They are designed and engineered by
Offroad enthusiasts just like you to be rock solid at an affordable price. Hyline Offroad would like to
thank you for your recent purchase and look forward to serving you in the future.
Hyline Offroad Staff