Hyline Offroad XJ LOUVERED HOOD PANEL User Manual
Proudly made in, Tools needed parts list, Optional winch installation
Proudly Made In
USA
Vehicle Fitment:
1987-2001 Jeep Cherokee
Installation Instructions:
XJ Hood Louver Panel
Part Number: XJ-50HLP
Safety Glasses
Jig Saw OR
Cut Off Wheel
Ratchet
13mm & 3/8”
Socket
File OR Sandpaper
Clear Spray Paint
Electric Drill
1/16”, 13/64” & 1/4”
Bit, 1” Hole Saw
Flat Screw Driver
Tools Needed
Parts List
Qty:
1 Left Side Louver Panel
1 Right Side Louver Panel
1 Steel Template
50 Nylon Locknuts
2 10-32 Pan Head Screws
Optional Winch Installation
Congratulations on your purchase of the Hyline Offroad Hood Louver Panel. All of our products are completely
manufactured in our facility located in Perkasie, PA. They are designed and engineered by Offroad enthusiasts just
like you to be rock solid at an affordable price. Hyline Offroad would like to thank you for your recent purchase and
look forward to serving you in the future.
Hyline Offroad Staff
T:\Hyline Offroad, LLC\Installation Instructions\XJ-50HLP\XJ-50HLP Installation Instructions.doc
Page
1
of
1
REV 0 05/20/10