Hyline Offroad TJ TUBE STEP ROCKER PANEL User Manual
Proudly made in, Parts list, Tools needed

Optional Winch Installation
T:\Hyline Offroad, LLC\Installation Instructions\TJ-30TSR\TJ-30TSR Installation Instructions.doc
Page 1 of 4
REV 0 12/2/08
Proudly Made In
USA
Installation Instructions:
TJ Tube Step Rocker Panel
Part Number: TJ-30TSR
Vehicle Fitment:
1997 – 2006 Jeep Wrangler
Parts List
Qty:
1 Passenger & Driver Side
Rocker Panels
2 Rocker Panel Back up Strip
10 3/8” x 1” Stainless Cap Bolts
10 3/8” Flanged Lock Nut
2 Paint Guard Adhesive Foam
Tools Needed
Congratulations on your purchase of the Hyline Offroad Tube Step Rocker Panel. All of our products are completely
manufactured in our facility located in Perkasie, PA. They are designed and engineered by Offroad enthusiasts just
like you to be rock solid at an affordable price. Hyline Offroad would like to thank you for your recent purchase
and look forward to serving you in the future.
Hyline Offroad Staff
Safety Glasses
Ratchet
9/16” Deep Socket
12” Extension
16mm Socket
Floor Jack
Approx, 18”
Block of Wood
Hand Drill
3/8’’ Bit
3/8” Transfer Punch
C-Clamp or Vise
Clamp
Light Duty Hammer
7/32 Allen Wrench
8mm Wrench
Document Outline
- Proudly Made In USA
- Parts List
- Hyline Offroad Staff
- 7/32 Allen Wrench
- 8mm Wrench
- Safety Glasses
- PLEASE READ INSTRUCTIONS BEFORE BEGINNING INSTALLATION
- Figure 1
- Figure 4
- Figure 3
- Figure 2
- Passenger Side Shown. Complete one side installation at a time.
- Figure 5
- Figure 6
- You only have to trim down the two body mount bushings located directly beneath the passenger and driver side doors. The other bushing that is closer to the front DOES NOT have to be trimmed and will remain in place.
- Figure 7
- Figure 8
- Figure 9
- Figure 10
- PLEASE READ INSTRUCTIONS BEFORE BEGINNING INSTALLATION
- Parts List