Hyline Offroad JK LOUVERED HOOD PANEL User Manual
Proudly made in, Parts list, Tools needed
***BEFORE INSTALLING***
Q:\Hyline Offroad, LLC\Installation Instructions\JK-50HLP\JK-50HLP Installation Instructions.doc
Page 1 of 5
REV 0 8/6/10
Proudly Made In
USA
Installation Instructions:
JK Hood Louver Panel
Part Number: JK-50HLP
Vehicle Fitment:
2007-Present Jeep Wrangler
2-Door & 4-Door
Parts List
Qty:
1 2 Piece Hood Louver Panel
1 Steel Template
46 Nylon Locknuts
2 10-32 Pan Head Screws
Tools Needed
Ratchet & Sockets
3/8”, 9mm, 10mm
T-50 Torx
File OR Sandpaper
Drill
1/16”, 3/16” & 1/4” Bits
1” Hole Saw
Congratulations on your purchase of the Hyline Offroad Hood Louver Panel. All of our products are
completely manufactured in our facility located in Perkasie, PA. They are designed and engineered by
Offroad enthusiasts just like you to be rock solid at an affordable price. Hyline Offroad would like to
thank you for your recent purchase and look forward to serving you in the future.
Hyline Offroad Staff
PLEASE READ INSTRUCTIONS BEFORE BEGINNING INSTALLATION
Jig Saw OR
Cut Off Wheel
Painters/Masking Tape
Safety Glasses
Clear Rust Inhibitor
Spray