Hyline Offroad TJ/YJ STANDARD REAR BUMPER User Manual
Proudly made in, Parts list, Tools needed
Optional Winch Installation
C:\Users\RHerd\AppData\Local\Temp\TJ-YJ-20SRB InstallationInstructions.doc
Page 1 of 3
REV 1 9/4/2009
Proudly Made In
USA
Installation Instructions:
TJ & YJ Standard Rear Bumper
Part Number: TJ-YJ-20SRB(T)
Vehicle Fitment:
1987-2006 Jeep Wrangler &
Unlimited
Parts List
Qty:
1 Standard Rear Bumper
2 Left & Right Frame Tie-in
Brackets
2
Spacer Shims
8
7/16-20 x 1-3/4” Gr8
Bolts
8
7/16” Gr8 Flat Washers
8
7/16” Gr8 Lock Washers
4
7/16-14 x 3-1/2” Gr5
Bolts
4
7/16-14 Gr5 Hex Nut
Tools Needed
Ratchet
18mm Socket
5/8” Socket
Torque Wrench
18mm Wrench
5/8” Wrench
Drill
7/16” Bit
Congratulations on your purchase of the Hyline Offroad Standard Rear Bumper. Our Bumpers are completely
manufactured in our facility located in Perkasie, PA. They are designed and engineered by Offroad enthusiasts just
like you to be rock solid at an affordable price. Hyline Offroad would like to thank you for your recent purchase
and look forward to serving you in the future.
Hyline Offroad Staff
Safety Glasses