GrimmSpeed Alternator Cover - Manual

GrimmSpeed Install Guide Series
Installing the GrimmSpeed Subaru Alternator Cover
Updated 11/20/13
Introduction: This guide will illustrate the installation of the GrimmSpeed
Alternator Cover. The difficulty here is super low, so take your time and enjoy the
job!
Tools: The tools listed below are suggested for this task (figure 1). Optional tools
are noted.
- 10mm socket and accompanying ratchet
- 12mm socket (if you need to install the OEM bracket)
- 5mm Allen Wrench
Figure 1: Tools
Tips: Use care to not drop the anodized spacers into your engine bay, but if you do,
don’t burn yourself while you reach for them!
Procedure:
1. Begin by collecting your tools and popping your hood. This’ll be quick!
10mm socket/ratchet
5mm Allen