GrimmSpeed 02-07 WRX/STi/Impreza Hood Struts - Manual

GrimmSpeed Install Guide Series
Installing the GrimmSpeed 02-07 Subaru Hood Strut Kit
Updated 12/12/13
Introduction: This guide will illustrate the installation of the GrimmSpeed Subaru
Hood Strut Kit. The difficulty here is relatively low, so take your time and enjoy the
job!
Tools: The tools listed below are suggested for this task (figure 1). Optional tools
are noted.
- 1/2in wrench
- 13mm wrench
- 10mm, 12mm, 13mm sockets
- Ratchet and extension
- Flathead screwdriver
Figure 1: Tools
Tips: Be careful not to drop the hood on yourself or your fingers during installation!
10, 12, 13mm
Screwdriver
1/2in