GrimmSpeed Strut Bar - Manual

GrimmSpeed Install Guide Series
Installing the GrimmSpeed BRZ/FR-S Strut Tower Brace
Updated 8/14/13
Introduction: This guide will illustrate the installation of the GrimmSpeed Strut
Tower Brace on your BRZ/FR-S. The difficulty here is super low, so take your time
and enjoy the job!
Tools: The tools listed below are suggested for this task (figure 1). Optional tools
are noted.
- 12mm socket and accompanying ratchet
- Torque wrench capable of accurately measuring 12ft-lbs
- Scissors or alternate method of cutting zip ties
Figure 1: Tools
Tips: This install guide demonstrates installation of the AC line sheath and securing
method last. Installing these first may leave some extra working room if you need
additional space to work.
Scissors 12mm socket/ratchet
Torque Wrench