GrimmSpeed Brake Master Cylinder Brace - Manual

GrimmSpeed Installation Guide Series
Installing the Mitsubishi Evo 8/9 Master Cylinder Brace
Updated 7/17/12
Introduction: This guide will illustrate how to install the GrimmSpeed Evo8/9
Master Cylinder Brace. Expect this installation to take 30min at a leisurely pace.
Tools: The tools listed below are suggested for this task. Optional tools are noted.
- 3/8 in Ratchet
- 10mm Deep well socket
- 12mm Deep well socket
- 14mm Deep well socket
- 3in extension
Procedure:
1. Start by popping your hood and familiarizing yourself with the area we’ll be
working with. Remove your negative battery terminal.
Ratchet,
Extension, deep
10mm, 12mm,
14mm sockets