GrimmSpeed 05-07 LGT Brake Master Cylinder Brace User Manual
Page 4
G
rimm
s
peed
4
11. Reinstall the two bolts that were originally used to secure this bracket. Check to ensure that all hoses
connected to the bracket are still intact.
12. Assemble stud, nuts and pressure cup as shown in the picture. Do not tighten the nuts.
13. Using a 15mm wrench and 5mm hex key, insert hex key into stud and tighten the nut closest to the
master cylinder which will extend the stud. Ensure that the other nut is loose. When the pressure cup
makes contact with the master cylinder, tighten the nut an additional 1 to 1.5 turns.
14. Now tighten the other nut to lock the adjustment into place.