GrimmSpeed 05-07 LGT Brake Master Cylinder Brace User Manual
Page 2
G
rimm
s
peed
2
3. Remove two bolts that hold the wiring harness bracket to the strut tower. Push the bracket aside; we’ll
reattach it in a bit.
4. Remove the two bolts that hold the fuel line bracket to the strut tower. The GrimmSpeed brace
replaces this bracket, so set it aside.
5. Inspect the OEM threaded body holes on the strut tower. If threads are rusty, run an M6 x 1 tap to
clean the threads before installing brace.
6. Holding the fuel lines out of the way, carefully maneuver the brace into position as shown below. You
should be able to do this without disconnecting the lines, even on vehicles with FMIC kits.