Worklight switch (with optional road lights), Operation – SkyTrak 10042 Operation Manual User Manual
Page 52
50
Model 10042
Rev. 11/03
Operation
Worklight Switch (with Optional Road Lights)
This rocker switch (1) activates the worklight system. The switch is located
in the upper switch bank on the right side dash panel. This system will only
operate when the ignition switch is in the RUN position. See “Parking Lights,
Headlights & High/Low Beam Switch” on page 52 for operation of the road
lights.
• Push the top of the switch IN to
DEACTIVATE the entire the worklight
system.
• To ACTIVATE the boom worklight
position the rocker switch to the center
position.
• Push the bottom of the switch IN to
ACTIVATE the boom worklight and
rear worklights.
OH2620
OH2591
OH2611
OH2601
OH3320
1