SkyTrak 10042 Operation Manual - Manual (Page 109)

Emergency Operations
107 Model 10042 Rev. 11/03
BOOM RETRACT LINE FAILURE
1. Clear the area of any unnecessary personnel.
2. Place the travel select lever in (N) NEUTRAL, move the neutral lock
lever to NEUTRAL LOCK position and engage the parking brake
switch.
3. Block all four wheels.
4. If the load is in a position where it can be removed safely, com-
pletely remove the load from the carriage and/or attachment, other-
wise leave the load in place.
5. Place a 10 gallon (40 liter) container under the vehicle to catch any
hydraulic oil that will escape during this procedure.
STEP 4
WARNING:
DO NOT get under a raised boom unless the
boom is blocked up. Always block the boom before doing any ser-
vicing that requires the boom to be up.