BNC 577 - Manual (Page 49)

Model 577 Operating Manual 29
Output Resolution 10 mV
Current 200 mA typical, 400 mA (short pulses)
Rise Time 15 ns typ @ 20V (high imp)
25 ns typ @ 10V (50 ohms)
(10% - 90%)
Slew Rate >0.1 V/ns
Overshoot <100 mV + 10% of pulse amplitude
Trigger/Gate Dual Input Module (Standard)
Trigger Input:
Function Generate individual pulses, start a burst or continuous stream
Rate DC to 1/ (200 ns + longest active pulse). Maximum of 20 MHz
Slope Rising or Falling
Threshold 0.2 to 15 VDC
Maximum Input 30 V Peak
Resolution 10 mV
Trigger Accuracy ±3% of Threshold Voltage
Impedance 5.3 Kohm + 40 pF
Rate DC to 20 MHz
Trigger Jitter < 800 ps RMS
Insertion Delay < 100 ns
Minimum Pulse Width ≥ 20 ns
Pulse Inhibit Delay < 150 ns RMS
Output Inhibit Delay < 100 ns RMS
Gate Input:
Mode Pulse inhibit or output inhibit
Polarity Active high/active low
Trigger Jitter (Gate as Trigger Input) < 800 ps RMS
Optical Outputs
Wavelength 820 nm or 1300nm
Maximum Signal Rate 5 MBd
Maximum Link Dist. 1.5 Km
Connector Type ST
Optical Inputs
Wavelength 820 nm or 1300 nm
Maximum Signal Rate 5 MBd
Maximum Link Dist. 1.5 km
Connector Type ST
Insertion Delay <300 ns
Jitter <1.4 ns RMS
AT35 Specifications
Through a 50Ω load at 200 Hz
Output 5 V – 35 V
Setpoint Resolution 10 mV
Rise Time < 30 ns
Accuracy 500 mV
Max. Frequency
(Internal & External)
4000 Hz