BNC 577 - Manual (Page 47)

Model 577 Operating Manual 27
14 Model 577 Specifications
I/O Configuration
Model/Output 577 – 2C: 2 Independent Channels
577 – 4C: 4 Independent Channels
577 – 8C: 8 Independent Channels
Output Modules:
Standard
AT20 Dual Channel, TTL/CMOS & Adjustable Output Module
Optional
L82 Dual Channel, 820 nm Optical Output Module
L130 Dual Channel, 1300 nm Optical Output Module
AT35 Dual Channel, TTL/35 V High Voltage Output Module
AT45 Dual Channel, 45 V High and Low Impedance Voltage Output
Module (limited to 4 channels)
TZ50 Dual Channel, High Current TTL/CMOS (for driving 50 ohm
loads) & Adjustable Output Module
TZ35 Dual Channel, High Current TTL/CMOS (for driving 50 ohm
loads) & 35V High Voltage Output Module
Input Modules:
Standard
IA15
Dual Channel, 1 Trigger / 1 Gate Input Module
* Standard dual channel input module, providing one Trigger
input and one Gate input. May be used with the Dual Trigger
firmware Option to provide two independent Trigger sources.
Optional
IL82 Dual Channel, 820 nm Optical Input Module
IL130 Dual Channel, 1300 nm Optical Input Module
Internal Rate Generator
Rate (T
0
period) 0.001 Hz to 20.000 MHz (1000 s – 50 ns)
Resolution 5 ns
Accuracy 5 ns + (0.0001 x period)
T
0
Period Jitter < 500 ps RMS
Time Base 200 MHz, low jitter PLL
Oscillator 50 MHz, 50 ppm crystal oscillator
System Output Modes Single, Normal, Burst, Duty Cycle, External Gate/Trigger
Burst Mode 1 to 1,000,000 pulses
Duty Cycle Mode 1 to 1,000,000 pulses ON and/or OFF
Pulse Control Modes Internally triggered, externally triggered or external gate.
Channel Timing Generator
Pulse Width Range 1000 s – 10 ns
Width Accuracy 10 ns + [0.0001 x (width + delay)]
Width Resolution 10 ns
Pulse Delay Range +1000 s