Fast & Fluid Giotto Column - Manual (Page 14)

Fast & Fluid Management
A Unit of IDEX Corporation
________________________________________________________________________________
________________________________________________________________________________
13
1154915C-it,en,fr.doc - 15/10/2003
DIAGRAM 3
5.- CONTROL
Operate the main switch (1) (DIAGRAM 4). The green led (3) will light : this means that the electrical
supply is connected.
Set the timer (2) with a time of about 5 minutes and check that the machine works correctly.
During this phase the turning table has to be rotated in all position, until it returns to the starting
point.
When the set time is over, the device will automatically stop.
In case of problems, extract the plug from the socket and ask for the intervention of a technician.