AKiTiO NT2 LAN - Manual (Page 60)

NT2 LAN Appendix
Page 57
4.5 Precautions
4.5.1 Power on/off precautions
It is recommended to switch the unit off when not in use. When re-locating the device or when not
in use for an extended period of time, we strongly recommend unplugging the unit.
4.5.2 Location and placing precautions
Avoid positioning your device in the following places:
•
Locations with direct sunlight, next to radiators, other sources of heat.
• Locations with very high temperatures (more than 38° C) or humidity (more than 90%).
• Very dusty or sandy locations.
• Locations subject to vibration, shock, or with a sloping base.
4.5.3 Electricity and power plug
Careful attention must be paid to the following points in order to prevent damage, fire, and/or injury:
•
Make sure the power switch is in the OFF position when you connect the power adapter and
always connect the power adapter to your device first, before you plug it into the wall socket.
• When removing the power cable from the socket, pull on the plug fixture and never on the cord.
• Do not connect and remove the power cable with wet hands.
• Never try to repair the power cable yourself or to modify it in any way.
• If the unit is dropped or becomes damaged in any other way, unplug the power cable.
4.5.4 Cables
Use only the cables supplied or recommended by your vendor in order to avoid the risk of
malfunction, electric shock, and/or possible interference to the device.
4.6 Important Notices
4.6.1 About this Manual
This manual was written for the NT2 LAN network drive with the firmware version as seen on the
front page. Images and descriptions may slightly vary between this document and the actual
product you have, and the available functions will depend on the firmware version.
4.6.2 Intellectual Property
The NT2 LAN network drive is not designed or intended to, and may not be used to violate any
copyrights or other IP (Intellectual Property) rights. Each user of the network drive may only use it
in connection with materials legally owned by or licensed to the user and only extend such
ownership or license rights that will permit such use.
© Copyright 2010 by Akitio. All Rights Reserved
The information contained in this manual is believed to be accurate and reliable. Akitio assumes no responsibility for any
errors contained in this manual. Akitio reserves the right to make changes in the specifications and/or design of this
product without prior notice. The diagrams contained in this manual may also not fully represent the product that you are
using and are there for illustration purposes only. Akitio assumes no responsibility for any differences between the
product mentioned in this manual and the product you may have.