AKiTiO NT2 LAN - Manual (Page 57)

NT2 LAN Network Storage & Extra Features
Page 54
3.9 USB Copy
When a USB drive is connected to the NT2 LAN via USB, all files on the USB drive can be copied
to the internal hard drive of the network drive with a push of a button.
10. Connect the USB drive to the front port of your NT2 LAN network drive. We recommend
using self-powered USB devices and in order for the network drive to mount the USB drive,
the file system has to be FAT32 (read/write) or NTFS (read only).
11. Press the Copy button for one second to copy all the files from the attached USB drive to
the Public folder on the network drive. During the USB backup, the system LED will be
flashing green.
12. A new folder with the current date and time will automatically be created and all files from
the USB drive will be copied into it. When the backup is done, the USB drive will be ejected.
13. The USB drive can now be removed and the data can be accessed on the network drive in
the Public directory.
Note
To safely remove the USB drive without doing a backup, go to the Disk Management menu, select
the external USB drive and click Remove in order to eject the drive.
When two USB drives are connected at the same time, it will only copy the data of the drive that
has been connected first.