AKiTiO NT2 LAN - Manual (Page 17)

NT2 LAN NAS Configuration
Page 14
2 NAS Settings and User Interface
2.1 How to login
To configure your NT2 LAN, open your web browser, enter the IP address of your NT2 LAN and
then use the web interface for further configuration. To locate the network drive and find out its IP
address, we recommend using the discover tool for PC users and the NAS Builder for Mac users.
Default Login
User name: admin
Password: 123456
2.1.1 Local or Remote Login via Web Browser
The network drive can be accessed via web browser from the local network or remotely in the
office or on-the-road.
1. Open your web browser (e.g. IE, Firefox, Safari).
2. Go to http://www.myakitio.com .
3. Select your preferred language and enter the name of your home server.
4. Your default home server name is the MAC address of your network drive. You can find
this number on a sticker either on the retail packaging or the device itself.
Note
To make it easier to remember the name of your home server, login using the web interface
and go to the Registration menu. There you can register the device under a new name.
1
2