AKiTiO NT2 LAN - Manual (Page 47)

NT2 LAN Network Storage & Extra Features
Page 44
10. Select RAW, use the default port number 9100 and then click OK to confirm it.
11. Click Finish to complete the TCP/IP Wizard and close the dialog box.
12. After clicking Next, a pop-up window will appear asking for a driver. Select your printer
model from the list or browse for the corresponding driver on your local drive.
13. In the next few steps, you will be able to give the printer a name, set it as default printer,
add a description and print a test page. It is not necessary to share the printer with other
network users, because it can be installed on other computers in the same way as here.
14. Once you have completed the set-up wizard your printer is ready.
Note
Not all USB printers are supported, e.g. multi function all-in-one printers and GDI/host-based
printers, therefore, your printer may not be compatible and printing might fail.