AKiTiO NT2 LAN - Manual (Page 5)

NT2 LAN Getting Started
Page 2
1.4 Detailed View
1.4.1 Front
LED/Icon Status/Function
• Blue = Power ON
• Flashing blue = Read/Write data access
• Red = Error or empty drive bay
(HDD 1 will light up during start up, this is normal)
• Flashing green = NAS system is ready and running in flash mode
(LED also flashes green during USB backup)
• Green = NAS system is ready and running in standard mode from HDD
• Green = NAS is connected to the network
Press this button for 1 second to copy all the files from the attached USB drive
to the public folder on the network drive.
USB 2.0 host port for USB drives (FAT32 read/write, NTFS read only)
• Press to turn on power.
• Press and hold for 3 seconds to shut down the
system.
• Press and hold for 6 seconds to cut off power and
forcefully power off the system (not recommended
under normal circumstances).