4 nas builder on a mac, Nas builder on a mac – AKiTiO NT2 LAN User Manual
Page 20
NT2 LAN NAS Configuration
Page 17
2.1.4 NAS Builder on a Mac
The NAS builder can be used to locate and access the network drive on your local network.
1. Make sure that the network drive has already been initialized, that it is connected to the
same local network as your computer and the power is turned on.
2. Wait at least 15 seconds after turning on the network drive and then start the
NAS Builder
(see
Initializing the NAS System on a Mac
for instructions on how to start the NAS
Builder on the Mac).
Click
Probe to locate the device.