AKiTiO NT2 LAN - Manual (Page 30)

NT2 LAN NAS Configuration
Page 27
Network
Device Name
This name is used to identify your device on the network. If you prefer a different name that is
easier to remember, change it and click Submit to save the new name. When selecting a new host
name, make sure to use a unique name and not one that has already been used on the local
network. By default, the device name is set to NT2-LAN.
LAN Setting
We recommend using “Automatically DHCP”, in order for the network drive to automatically obtain
its IP address from the DHCP server. If required, you can also set it to a static IP address and fill
out all information manually. If you need assistance with these settings, please contact your
network administrator for help.
Note
After changing any of the settings, click Submit to save the new configuration.
FTP Service
The FTP server runs on port 21. To reduce the loading on the system and the bandwidth, FTP
clients can be limited according to your own preferences.
Note
For security reasons, we recommended disabling anonymous login.
Device name (host name)
LAN setting
DNS and gateway
Advanced FTP Settings
Option to enable or disable the
FTP server