ARB 3450110 - Manual (Page 9)

31 10 02 Page 9 of 16 3783013
23. If bar is to have original fog lights fitted,
position light into the two lower holes in light
mounting bracket, place packer washer
over light locating boss and refit light screws
into all 3 holes, tighten firmly using torx key.
( If vehicle does not have fogs fitted, they can be
purchased. Part no. 05083895 - 05083896 and
screw kit to suit. )
24. Refit vehicle loom to mounting system using
cable ties and plug back into connector body.
25. If bar is to have a winch fitted, follow the
next steps.
26. Fit number plate bracket to bar using 6mm
hardware.( 20mm x 6mm bolts ) Fit number
plate to number plate bracket using 6mm
hardware when bar is fitted to vehicle.
27. Fit control box bracket to bar using 8mm
hardware.
VIEW OF THE CENTRE OF BAR