ARB 3423030 - Manual (Page 10)

01-09-06 Page 10 of 15 3783174
.
27. Position the roller fairlead, and remove
the circlips from the lower of the verticle
rollers and push the pins up to give access
to the lower bolts.
28. Fix the roller fairlead to the bar using the
1 ¾” x 3/8” bolts, spring and flat washers.
29. When all bolts are fitted and tighten, refit
vertical roller pins back into roller fairlead
and refit circlips.
30. Fit number plate bracket to bar using
6mm hardware.