ARB RD197 - Manual (Page 9)

2 Removing the Existing Differential
7
2.3 Disconnecting the Axles
NOTE : The oil seals are delicate and can be easily damaged.
Support the weight of the axle shafts when drawing
them out of their sockets in the housing.
2.3.1 A IFS CV Shafts
 Remove the stub axles from the differential housing according to
your vehicle manufacturer’s service manual.
 Disconnect the drive shaft from the pinion flange.
 Completely remove the differential assembly from the vehicle.
2.3.2 B Live Axle Shafts
IMPORTANT :
Collision damage or heavy off-road use of your vehicle in the past may
have resulted in some degree of bending in the axle. Any misalignment
of the axle tubes may result in excessive wear and/or failure of your
differential and axle shafts. ARB strongly recommends that you have
your axle assembly inspected for concentricity and straightness before
installing your Air Locker.
 Remove the wheels, and brakes according to your vehicle
manufacturer’s service manual.
 Unbolt the four bolts retaining the hub and withdraw the axle shafts.