Philips 32PFL7694H-12 - Manual (Page 51)

50
Set TV speakers to EasyLink mode
When you play content from an EasyLink
compliant home theater, the TV speakers are
automatically muted.
1
When watching content from an EasyLink
device, press OPTIONS.
The options menu appears.
»
2
Press the Navigation buttons to select
[TV speakers].
The
»
[TV speakers] menu appears.
3
Press the Navigation buttons to select
[Automatic (EasyLink)].
4
Press OK to confi rm your choice.
The TV speakers are set to EasyLink
»
mode.
5
Press OPTIONS to exit.
Use a Kensington lock
There is a Kensington security slot at the back
of the TV. Prevent theft by looping a Kensington
lock between the slot and a permanent object,
such as a heavy table.
Enable or disable EasyLink
Note
Do not enable Philips EasyLink if you do not •
intend to use it.
1
When watching TV, press ( Home).
The home menu appears.
»
2
Press the Navigation buttons to select
[Setup].
The
»
[Setup] menu appears.
3
Press the Navigation buttons to
select [Installation] > [Preferences] >
[EasyLink].
The EasyLink menu appears.
»
4
Select [On] or [Off].
5
Press OK to confi rm your choice.
EasyLink is enabled or disabled.
»
Enable or disable remote control key
forwarding
Note
Enable EasyLink before enabling remote •
control key forwarding.
1
When watching TV, press ( Home).
The home menu appears.
»
2
Press the Navigation buttons to select
[Setup].
The
»
[Setup] menu appears.
3
Press the Navigation buttons to
select [Installation] > [Preferences] >
[EasyLink Remote Control].
4
Select [On], then press OK.
RC key forwarding is enabled or
»
disabled on the selected HDMI
connector.
Note
If you cannot exit from a device’s menu, press •
OPTIONS then OK.
EN