Philips 32PFL7694H-12 - Manual (Page 32)

31
Update the TV software
Philips continuously tries to improve its
products and we recommend that you update
the TV software when updates are available.
Check www.philips.com/support for availability.
Check the current software version
1
When watching TV, press ( Home).
The home menu appears.
»
2
Press the Navigation buttons to select
[Setup].
3
Press OK.
The
»
[Setup] menu appears.
4
Press the Navigation buttons to select
[Software update] > [Current software
info].
5
Press OK.
The version of the current software is
»
displayed.
Update software (from website)
Before performing this procedure be sure to:
Set aside some time to complete the •
entire update.
Have available a USB storage device with
•
at least 256MB of storage space.
Have access to a computer with a USB
•
port and internet access.
1
When watching TV, press ( Home).
The home menu appears.
»
2
Press the Navigation buttons to select
[Setup].
3
Press OK.
The
»
[Setup] menu appears.
4
Press the Navigation buttons to select
[Software update] > [Update now].
5
Press OK.
The update assistant starts. Follow the
»
on-screen instructions to complete the
update.
Use Scenea
Activate Scenea
You can use Scenea to display a picture as
wallpaper on your TV. Make sure that the
location of your TV is set to [Home] mode.
1
Press .
2
Select [Scenea] , then press OK.
The default or pre-loaded picture is
»
displayed.
Note
Note: If the sleep timer is off, the wallpaper •
is displayed for 240 minutes. Otherwise, it is
displayed for the duration of the sleep timer
(see ‘Automatically switch the TV to standby
(sleep timer)’ on page 25 ).
Set a picture as Scenea
Note
The fi le size of the picture must not be more •
than 1MB.
1
Connect the USB storage device to the
TV.
2
Select [Browse USB], then press OK.
3
Select a picture, then press .
4
Select [Set as Scenea], then press OK.
5
Select [Yes], then press OK.
6
Press any key to exit Scenea.
English
EN