View photos, play music and watch video, Use the tv clock – Philips 32PFL7694H-12 User Manual
Page 29

28
4
Press the Navigation buttons to select
[Installation] > [Clock] > [Auto clock
mode].
The
»
[Auto clock mode] menu
appears.
5
Press the Navigation buttons to select
[Automatic] or [Manual].
6
Press
OK to confi rm your choice.
The clock mode is set.
»
Enable or disable daylight saving
If clock mode is set to [Manual], enable or
disable daylight saving if required for your time
zone.
1
In the [Clock] menu, press the
Navigation buttons to select [Daylight
saving].
The
»
[Daylight saving] menu appears.
2
Press the Navigation buttons to select
[Daylight saving time] or [Standard time].
3
Press
OK to confi rm your choice.
Daylight saving is enabled or disabled
»
for your time zone.
View photos, play music and
watch video
Caution
Philips is not responsible if your USB storage
•
device is not supported nor is it responsible
for damage or loss of data from use of this
feature.
Your TV is fi tted with a USB connector that
enables you to view to view photos, listen
to music or watch movies stored on a USB
storage device.
Your TV also has a network connector, enabling
you to access and play media fi les directly from
your computer.
Use the TV clock
You can display a clock on the TV screen. The
clock displays the current time using time data
received from your TV service operator.
Display the TV clock
You can display a clock on the TV screen,
displaying the current time.
1
When watching TV, press OPTIONS.
The options menu appears.
»
2
Press the Navigation buttons to select
[Clock].
3
Press
OK to confi rm your choice.
The clock displays on the TV screen.
»
Note
To disable the clock, repeat the procedure
•
above.
Tip
The clock is also accessible via the
•
[Setup]menu (see ‘Access the setup menu’ on
page 14 ).
Change the clock mode
By default, the clock mode is set to
[Automatic], syncing the TV clock to
Coordinated Universal Time (UTC). If your
TV cannot receive UTC transmissions, set
the clock mode to [Manual]. If clock mode is
[Manual], time data is based on your current
time zone (see ‘Step 1 Select your system’ on
page 36 ) and daylight saving conditions (see
‘Enable or disable daylight saving’ on page 28 ).
1
When watching TV, press ( Home).
The home menu appears.
»
2
Press the Navigation buttons to select
[Setup].
3
Press
OK.
The
»
[Setup] menu appears.
EN