Brocade Communications Systems Brocade EZSwitchSetup 5100 User Manual
Page 35
EZSwitchSetup Administrator’s Guide
23
53-1002157-01
Connecting devices and completing the setup
2
FIGURE 19
EZSwitchSetup Configuration Finish screen
5. Click Finish to complete the switch setup.
You are now ready to configure the storage component of the SAN using the documentation
that came with the storage server.
If you want to monitor the switch, then you need to launch the EZSwitchSetup Switch Manager.
See
Chapter 3, “Managing Your Switch”
for instructions on using this interface.