Brother MFC-5440CN - Manual (Page 69)

4 - 3 SETUP RECEIVE
Setting the F/T Ring Time (Fax/Tel mode only)
If you set the Receive Mode to Fax/Tel, you’ll need to decide how long
the MFC will signal you with its special pseudo/double-ring when you
have a voice call. (If it’s a fax call, the MFC prints the fax.)
This pseudo/double-ring happens after the initial ringing from the
phone company. Only the MFC rings and no other phones on the
same line will ring with the special pseudo/double-ring. However, you
can still answer the call on any telephone on the same line as the MFC.
(See Fax/Tel mode when power key is On on page A-7 and Fax/Tel
mode when power key is Off on page A-7.)
1
If it is not illuminated in green, press ( Fax ).
2
Press Menu/Set , 2 , 1 , 2 .
3
Press ▲ or ▼ to select how long the
MFC will ring to alert you that you
have a voice call (20, 30, 40 or 70 seconds).
Press Menu/Set .
4
Press Stop/Exit .
Even if the caller hangs up during the pseudo/double-ringing,
the MFC will continue to ring for the set time.
Setup Receive
2.F/T Ring Time