Brother MFC-5440CN - Manual (Page 53)

3 - 2 SETUP SEND
Speed-Dialing
Press Search/Speed Dial , # , and then the two digit Speed-Dial
number. (See Storing Speed-Dial numbers on page 5-1.)
Search
You can search for names you have stored in the Speed-Dial
memories. Press
Search/Speed Dial and the navigation keys to
search. (See Storing Speed-Dial numbers on page 5-1.)
* To search alphabetically, you can use the dial pad to enter the first
letter of the name you are looking for.
Fax Redial
If you are sending a fax manually and the line is busy, press
Redial/Pause , and then press Black Start or Color Start to try
again. If you want to make a second call to the last number dialed,
you can save time by pressing
Redial/Pause and Black Start or
Color Start .
Redial/Pause only works if you dialed from the control panel.
If you are sending a fax automatically and the line is busy, the MFC
will automatically redial one time after five minutes.
If the LCD shows Not Registered when you enter the
Speed-Dial number, a number has not been stored for it.
two-digit number
To search alphabetically*
To search numerically
or