beautypg.com

2 getting started, Initial setup, Setting the date and time – Brother MFC-5440CN User Manual

Page 44: Setting tone and pulse dialing mode, Getting started -1, Initial setup -1, Getting started

background image

GETTING STARTED 2 - 1

2

Initial Setup

Setting the Date and Time

When the MFC is not in use it will display the date and time. If you
set up the Station ID the date and time displayed by your MFC will
be printed on every fax you send. If there is a power failure, you may
have to reset the date and time. No other settings will be affected.

1

Press

Menu/Set

,

0

,

2

.

2

Enter the last two digits of the year.

Press

Menu/Set

.

3

Enter two digits for the month.

Press

Menu/Set

.

(For example, enter 09 for September, or 10 for October.)

4

Enter two digits for the day.

Press

Menu/Set

. (For example, enter 06 for 6th.)

5

Enter the time in 24-Hour format.

Press

Menu/Set

. (For example, enter 15:25 for 3:25 P.M.)

6

Press

Stop/Exit

.

The LCD now shows the date and time whenever the MFC is in
Fax mode.

Setting Tone and Pulse dialing mode

1

Press

Menu/Set

,

0

,

4

.

2

Press

or

to select

Pulse

(or

Tone

).

Press

Menu/Set

.

3

Press

Stop/Exit

.

Getting started

Initial Setup
2.Date/Time

Initial Setup
4.Tone/Pulse

This manual is related to the following products: