Paper is jammed in paper tray 1 or tray 2, Paper is jammed in paper tray 1 or tray 2 uu, Bpaper is jammed in paper tray 1 or tray 2 – Brother MFC-8510DN User Manual
Page 97
Troubleshooting
89
B
Paper is jammed in paper tray 1
or tray 2
B
If the LCD shows Jam Tray 1 or
Jam Tray 2
, follow these steps:
a
Pull the paper tray completely out of the
machine.
For Jam Tray 1:
For Jam Tray 2:
b
Use both hands to slowly pull out the
jammed paper.
Note
Pulling the jammed paper downward
allows you to remove the paper easier.
c
Make sure that the paper is below the
maximum paper mark (
) in the
paper tray. While pressing the green
paper-guide release lever, slide the
paper guides to fit the paper size. Make
sure that the guides are firmly in the
slots.
d
Put the paper tray firmly back in the
machine.