Brother MFC-8510DN - Manual (Page 152)

144
7.Network
(MFC-8910DW)
(Continued)
2.WLAN
(Continued)
5.WLAN Status 1.Status
—
Active(11n)
Active(11b)
Active(11g)
Wired LAN Active
WLAN OFF
AOSS Active
Connection Fail
You can see the
current wireless
network status. See .
2.Signal
—
Strong
Medium
Weak
None
You can see the
current wireless
network signal
strength.
3.SSID
— — You can see the
current SSID.
4.Comm. Mode
—
Ad-hoc
Infrastructure
You can see the
current
Communication
Mode.
6.MAC Address
— — — Shows the MAC
address of the
machine.
7.Set to Default
— —
1.Reset
2.Exit
Restore the
wireless network
settings to factory
default.
8.WLAN Enable
— —
On
Off
*
Enable or disable
the wireless LAN
manually.
3.Wi-Fi Direct 1.Push Button
— — — You can easily
configure your
Wi-Fi Direct™
network settings
using the one-
button push
method. See .
2.PIN Code
— — — You can easily
configure your
Wi-Fi Direct™
network settings
using WPS with a
PIN code.
3.Manual
— — — You can manually
configure your
Wi-Fi Direct™
network settings.
Level 1 Level 2 Level 3 Level 4 Level 5 Options Descriptions Page
See Network User's Guide.
Please go to the Brother Solutions Center to download the manual at http://solutions.brother.com/.
The factory settings are shown in Bold with an asterisk.