Brother HL-1060 Series - Manual (Page 81)

APPENDIX
APPENDIX A –1
APPENDIX A
PRINTER SPECIFICATIONS
Printing
Print Method Electrophotography by semiconductor laser beam scanning
Laser Wavelength: 780 nm
Output: 5 mW max
Resolution 1200 (H) x 600 (V) dots/inch
(for Windows DIB graphics)
600 x 600 dots/inch
(for Windows and DOS)
300 x 300 dots/inch
(under Apple Macintosh using the optional RS-100M)
Print Quality Normal printing mode
Economy printing mode (up to 25% and 50% toner saving)
Print Speed Up to 10 pages/minute (when loading A4 or letter-size paper
from a multi-purpose sheet feeder)
NOTE: Maximum print speed is obtained by printing several
copies of the same page. Print speed may vary depending on
interface type, emulation, processing power of the computer,
memory allocated to the print job, paper size and graphic
quality.
Warm-Up Max. 30 seconds at 23°C (73.4°F)
(The warm up time depends on the ambient temperature and
humidity.)
First Print 15 seconds (when loading A4 or letter-size paper from the
multi-purpose sheet feeder 1)
Print Media Toner cartridge:
Life Expectancy: 2,200 pages/new toner cartridge
(when printing A4- or letter-size paper at 5% print coverage)
NOTE: Toner life expectancy will vary depending on the type of
average print job printed.