Brother HL-1060 Series - Manual (Page 27)

USER’S GUIDE
CHAPTER 2 –8
✒ Note
•
If the multi-purpose sheet feeder runs out of paper when you try to
print, the Alarm and Paper lamps blink to alert you. You have to load
paper in the feeder and push the panel switch to cancel the alarm and
continue printing. If paper jams in the printer, the Alarm and Paper
lamps also blink. If the error is a paper jam, clear it referring to
“PAPER
JAMS” in Chapter 6.
•
When the rear sheet feeder 2 runs out of paper and there is paper loaded
in the front sheet feeder 1, be sure to remove paper from Feeder 1
temporarily ( ➀ ) and load paper in Feeder 2. ( ➁ )
Fig. 2-7 Loading Paper in Feeder 2