Brother HL-1060 Series - Manual (Page 25)

USER’S GUIDE
CHAPTER 2 –6
Loading Paper into the Feeder
To load paper into the feeder, follow these steps.
✒ Note
This section describes loading paper into the front multi-purpose sheet
feeder 1. Load paper into the rear sheet feeder 2 in the same way as
described here. Remember, however, that paper sizes vary for Feeder 1 and
Feeder 2. For paper sizes, see
“PAPER SPECIFICATIONS” in Chapter 2.
1. Open the multi-purpose sheet feeder by gently pulling the tabs forward
towards you. ( ➀ )
2. Move the paper guides horizontally to the widest position. ( ➁ )
PULL
HERE TO
INSERT PAPER
Fig.2-4 Opening the Feeder and Moving the Paper Guides
3. Load paper into the multi-purpose sheet feeder with the printing surface
face down.
Fig. 2-5 Loading Paper or Envelopes in the Feeder