BT Hub Phone 1010 - Manual (Page 67)

Hub Phone 1010 – Edition 3 – 13.04.06 – 7451
No ring on the handset
Check that the base station is plugged into the phone socket and that the mains power is
switched on.
The ringer volume may be set too low for you. See page 48 to adjust the volume.
Buzzing noise on my radio, TV, computer or hearing aid
Sometimes your BT Hub Phone 1010 can interfere with other electrical equipment if it is
placed too close.
It is recommended that you place your BT Hub Phone 1010 at least one metre away from
such appliances to avoid any risk of interference.
The handset charger is not working
Check that the power adaptor is properly plugged into the charger.
Make sure your handset has slotted correctly into the charger.
Check the batteries are fitted correctly into the handset.
Check the base is plugged in to a working mains power socket and that the power is
switched on.
Are you using the correct power adaptor?
Help 67
Hub Phone 1010 [3]DkBlue 13/4/06 5:45 pm Page 67