BT Hub Phone 1010 User Manual

Page 58

Hub Phone 1010 – Edition 3 – 13.04.06 – 7451

2. Press

to scroll and display

REGISTRATION

and

press

is displayed, press

to select.

BASE 1

is displayed. Press

to select the base

number you want to register to and press

SYSTEM PIN

is displayed. Enter the PIN code using the

keypad and press

to confirm and begin

registration.

BASE SEARCH X

is displayed (where X is the base

number). When registration is successful

HANDSET

REGISTERED

is displayed. Press

to return to

standby.

The handset will automatically be allocated the next
available handset number which will be displayed when in
standby mode.

If your handset is already registered
to a base, the

symbol will be

shown to the right of the base
number.

If there are already 5 handsets
registered to the base you will hear
a double beep.

Each digit of the PIN code will be
displayed as a

for security

reasons.

Press

Clear

if you enter an

incorrect digit.

If you enter the wrong PIN code
you will hear a double beep.

If registration fails, the handset will
return to standby mode and you
will need to repeat the registration
procedure and try a different base
number.

Using additional handsets

Hub Phone 1010 [3]DkBlue 13/4/06 5:45 pm Page 58