BT Hub Phone 1010 - Manual (Page 45)

Hub Phone 1010 – Edition 3 – 13.04.06 – 7451
Beep tones
Your BT Hub Phone 1010 handset emits beeps to alert
you to certain situations. You can set the handset to
beep:
• To beep as confirmation each time a handset button is
pressed (key beeps).
• If the battery is low.
• If you go out of range of the base.
These beeps can be switched ON or OFF.
To switch key beeps On/Off
1. Press Menu to access the menu.
2. Press or to scroll and display HANDSET and
press OK .
3. Press or until BEEP TONES is displayed and
press OK .
However, beeps which confirm
settings cannot be switched off.
The default setting for all key beeps
is ON.
Handset settings 45
Hub Phone 1010 [3]DkBlue 13/4/06 5:45 pm Page 45