BT Hub Phone 1010 - Manual (Page 44)

Hub Phone 1010 – Edition 3 – 13.04.06 – 7451
4. The current menu colour is highlighted. Press or
to select a new menu colour and press Save to
confirm. SAVED is displayed.
Auto-talk
When you receive a call, if the handset is on the base
you can answer it by lifting the handset off the base, this
is called auto-talk. When you switch auto-talk off, all
calls must be answered by pressing
.
1. Press Menu to access the menu.
2. Press or to scroll and display HANDSET and
press OK .
3. Press or until AUTO TALK is displayed and
press OK .
4. The current setting is displayed. Press or to
select ON or OFF then press OK . The new setting is
displayed.
6. Press Back repeatedly to return to the idle screen.
To exit to standby at any time,
press
Back .
Handset settings 44
The default setting is ON.
Hub Phone 1010 [3]DkBlue 13/4/06 5:45 pm Page 44