BT Hub Phone 1010 - Manual (Page 21)

Hub Phone 1010 – Edition 3 – 13.04.06 – 7451
To redial a number
From standby:
1. Press to access the redial list.
2. Press or to scroll and display the number you
want.
3. Press to dial the number.
Via the menu:
1. Press Menu to access the menu.
2. Press or to scroll and display CALLS LISTS and
press OK .
3. RECEIVED CALLS is displayed. Press or
until DIALLED CALLS is displayed and press OK
to display the redial list.
4. Press or to scroll and display the number you
want.
5. Press to dial the number.
If a name/number match is found in
the phonebook the name will be
displayed instead of the number.
If you have dialled the same
number on more than one
occasion, the call will appear only
once in the redial list.
Each redial number can be up to a
maximum of 20 digits long.
Numbers exceeding 20 digits will
not be stored.
Redial names can be up to 16
characters.
When you are at the top of the list,
pressing
takes you to the oldest
call and when at the bottom,
pressing
takes you to the
newest.
If there are no numbers saved in
the redial list
EMPTY will be
displayed.
Using the phone 21
Hub Phone 1010 [3]DkBlue 13/4/06 5:45 pm Page 21