BT Hub Phone 1010 - Manual (Page 52)

Hub Phone 1010 – Edition 3 – 13.04.06 – 7451
3. Press or until SYSTEM PIN is displayed and press
OK .
4. ENTER OLD PIN is displayed. Enter your old 4 digit PIN
then press OK .
5. ENTER NEW PIN is displayed. Enter a new 4 digit PIN and
press OK . CONFIRM NEW PIN is displayed.
6. Re-enter your new 4 digit PIN again for verification then
press OK . SYSTEM PIN CHANGED is displayed.
7. Press Back repeatedly to return to standby.
Base settings 52
As you enter the PIN number, each
digit is displayed as
* for security
reasons.
Press Clear if you enter an
incorrect digit.
Hub Phone 1010 [3]DkBlue 13/4/06 5:45 pm Page 52