Bush Hog 2045 User Manual

Page 49

BUSH HOG / MATERIAL HANDLING REPAIR PARTS MANUAL

1-19C-15

50047787 GRILL GUARD KIT

For 2045 Loader

Used with Cub Cadet Tractor Models: 7530 FWA, 7532 FWA

REF.

PART

NO.

QTY. DESCRIPTION

50047827

Grill Guard Weldment

––––

Capscrew 1/2” x 1-3/4” Gr.5 ZP

––––

Lockwasher 1/2”

––––

Hex Nut 1/2”

50047829

Instruction Sheet

CAUTION: Before leaving tractor seat, stop engine, lock brake, relieve hydraulic
pressure, and remove key.

CAUTION: Do Not allow bystanders in work area.

I N S TA L L AT I O N N O T E S

Remove all mounting brackets from crate. (Refer to Fig. 1 on Page 2 to insure that all components have been included)

Remove the tractor front weights.

Clean threaded holes in the tractor frame with a tap of the proper size. Paint, rust and/ or debris
in the threads may cause bolts to misalign or not tighten correctly.

This mounting kit has metric fasteners. Insure that the proper fasteners are used in the correct
locations. (Refer to Fig. 2 on Page 2 as an aid to identifying correct fasteners)

Leave all mounting hardware loose until mounting kit is completely installed.

After the mounting kit installation is complete, tighten all hardware to the specifications given in the bolt torque chart
on Page 6.

After the first hour and then after every 4 hours for the first day of operation, all mounting hardware should be checked
for proper torque specifications.

Page 1

03/12/04

50-04

Instruction Sheet No. 50020442

B U S H H O G / G R E AT B E N D

M O U N T I N G B R A C K E T K I T F 8 2 6 0 0

Note: Front weights and front Weight Bracket must be removed prior to Front Bracket installation and can not be reinstalled.
Note: Steering stops must be adjusted out.
Note: Requires longer 4 Hose Kit (F82236) and/or 6 Hose Kit (F82268).
Note: Requires greater dig depth with bolt on cutting edge when tractor is equipped with 14.9-30 front tires

and 760, 770, 860 or 870 loaders.

Note: McCormick MTX155 & MTX175 tractors requires installation of 235327A2 front support if tractor is not already

equipped with support from factory (purchase from your McCormick dealer).

Note: Fits 660C (Long Subframe), 760, 770B (Long Subframe), 860A & 870A (Standard Subframe) Models.

F O R T R A C TO R M O D E L S

C A S E / I H

MX100, MX110, MX120, MX135, MX150 & MX170.

M c C O R M I C K

MTX110, MTX125, MTX145, MTX155, MTX175 & MTX 200.

Bush Hog 3860QT Loader and / or

Great Bend 660/770/860/870 Loaders

SEPTEMBER, 2006