Brother HL-3450CN - Manual (Page 80)

CHAPTER 4 CONTROL PANEL OPERATION
4-7
Reprint the last JOB 3 times
1. Use the control panel to turn the REPRINT function ON in SETUP
mode.
Notes
If you are using the driver supplied with the printer, the settings for spooling
jobs in the printer driver will take priority over the settings made using the
control panel. For more information about the settings in the printer driver, see
“Job Spooling” in C hap ter 2 .
2. Press Reprint .
---REPRINT---
COPIES= 1 If you wait too long to continue the key operation, the display
exit the REPRINT menu automatically.
Press + twice.
---REPRINT---
COPIES= 3
Press
Set or Reprint.
PRINTING
---REPRINT---
COPIES= 1
Notes
•
If you press Go , the printer will exit from the Reprint menu.
• If you want to reprint the data and have pressed Go , the display will show
“ PRESS SET TO PRINT. ” Press Set to start reprinting, or press Go to
cancel the reprint job.