Caution – Brother HL-3450CN User Manual

Page 206

CHAPTER 7 TROUBLE SHOOTING

7-28

Question Recommendation

Off set image

ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz.
ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz.
ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz.
ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz.

1) Check that the specified paper is being used.
2) Check that the oil is not empty.
3) Replace the Fuser Cleaning Roller

Poor fixing

1) Check that the specified paper is used.
2) Check that the media type mode is selected

correctly.

Poor fixing

Wait 15 to 30 minutes and try again.

Poor fixing when
printed on thick paper

Set the printer to thick paper mode through the control
panel or the printer driver.

Blurred vertical band
and spots of color.

Clean the Charging Wire. For more information about
the cleaning procedure, see “Periodic Printer
Cleaning” in Chapter 5.

Dirt on the printed
pages

Clean the Paper Guide, the Registration Roller and the
Exit Roller referring to ‘Periodic Printer Cleaning’ in
Chapter 5.

If the same problem re-occurs, contact your dealer or Brother Authorized
Service Representative.

Caution

Operation of the printer outside the specifications shall be deemed abuse
and all repairs thereafter shall be the sole liability of the end user/purchaser.