Using the radio using in pc monitor mode – Philips Matchline Téléviseur User Manual

Page 9

Using the radio

Using in PC monitor mode

Choosing radio mode

Press the

key on the remote control to

switch the TV to radio mode. Press the

key to return to TV mode. In radio mode the
number and name of the station (if available),
its frequency and the sound mode are
indicated on the screen.

Selecting programmes

Use the

or @

# keys to select the

FM stations (from 1 to 40).

List of radio stations

Press the

key to display / hide the list of

radio stations. Then use the cursor to select a
station.

Using the radio menus

Use the

key to access the specific radio

settings.

Searching radio stations

If you have used the quick installation all the
available FM stations will be stored. To start a
new search use the

Install

menu :

Auto Store

(for a complete search) or

Manual Store

(for

a station by station search).These menus work
in exactly the same way as the TV menus.

Screen saver

In the

Features

menu you can activate / close

the screen saver.

PC Mode

Your TV can be used as a computer monitor.
The PIP function lets you display a
superimposed image to watch the TV channels
at the same time.
You must first of all connect the computer and
adjust the resolution (see p.11).

Choosing PC mode

Press the

key on the remote control to

switch the TV to PC-A mode

(VGA In)

or PC-

D mode

(DVI In)

. Press the

key to return

to TV mode.
If there is no PC signal for more than five seconds,
the TV automatically goes into standby mode.

Using PIP

While in PC mode you can call up a window
for TV channels.
Attention: the PIP feature is only available if a
computer is connected to the DVI In (see p. 11).

& Press the œ key to display the PIP screen.

The television image is reproduced in a small
superimposed window.

é Subsequent presses of the œ key changes the

size of the window, switches to dual screen
and turns PIP off.

“ Use the @

# keys to change the

programmes of the PIP screen or the

key if

you want to display a picture from an appliance
connected to the TV (e.g. video recorder,
DVD).

Using the PC menus

Press the

key to access the specific settings of

the PC monitor mode. Use the cursor to adjust
them (the settings are automatically saved) :

•

Picture

Brightness / Contrast

: to adjust the

brightness and contrast.

Horizontal / Vertical

: to adjust the horizontal

and vertical placing of the image.

Adjust Colour

: to adjust the colours (cold,

normal or warm).

•

Audio Selection

: to choose the sound

reproduced on the TV (PC or TV/Radio).
For example, you can listen to the radio while
you use the computer.

•

Features

Phase/Clock

* : eliminates the horizontal

(

Phase

) and vertical (

Clock

) interfering lines.

View Format

: to choose between large screen

or the original format of the PC screens.

PIP Controls

: to adjust the size and position

of the PIP screen.

Auto Adjust

: position is set automatically.

•

Reset To Factory Setting

: to return to the

factory settings (default settings).

•

Mode Select

: to come back to TV or radio

mode.

*These adjustments are not available when a
computer is connected to the

DVI In