Troubleshooting – Belkin F5D9630-4 User Manual

Page 80

Troubleshooting

and 0-9. For 128-bit WEP, you need to enter 26 keys. This network
key needs to match the key you assign to your Router.
For example:
C3 03 0F AF 4B B2 C3 D4 4B C3 D4 E7 E4 = 128-bit key

. Click “OK”, and then “Apply” to save the settings.

If you are not using a Belkin wireless client card, please consult the
manufacturer’s user manual for that wireless client card.

Problem:

Do Belkin products support WPA?

Solution:

Note: To use WPA security, all your clients must be upgraded
to drivers and software that support it. At the time of this FAQ
publication, a security patch download is available, for free, from
Microsoft. This patch works only with the Windows XP operating
system.
You also need to download the latest driver for your Belkin 802.11g
Wireless Desktop or Notebook Network Card from the Belkin
support site. Other operating systems are not supported at this
time. Microsoft’s patch only supports devices with WPA-enabled
drivers such as Belkin 802.11g products.

Download the latest driver at

http://web.belkin.com/support for

the following products:
F5D7000, F5D7001, F5D7010, F5D9010, F5D9050, F5D7230-4,
F5D7231-4, F5D7130, F5D9230-4

Problem:

I am having difficulty setting up Wireless Protected Access (WPA)
security on my Belkin Router for a home network.

Solution:
1

. From the “Security Mode” drop-down menu, select “WPA-PSK

(no server)”.

. For “Encryption Technique”, select “TKIP” or “AES”. This setting

will have to be identical on the clients that you set up.

. Enter your pre-shared key. This can be from eight to 63

characters and can be letters, numbers, symbols, or spaces.