Belkin F5D9630-4 - Manual (Page 73)

71
Troubleshooting
71
se
ct
io
n
2
1
3
4
5
6
7
8
9
10
12
power back into the Router. Ensure that the Router’s “Power”
LED is on; it should be solid GREEN. If not, check to make sure
that the AC adapter is connected to the Router and plugged into
a wall outlet
3
. Ensure that you have a cable connected between (1) the
network (Ethernet) port on the back of the computer and (2) one
of the “Connections to your computers” ports on the back of the
Router.
Note: The computer should NOT be connected to the port
labeled “DSL Line” on the back of the Router.
4 . Try shutting down and restarting your computer, then rerunning
the Setup Assistant.
If the Setup Assistant is still unable to find the Router, reference
the section titled “Manually Configuring Network Settings” for
installation steps.
Problem:
Setup Assistant cannot connect my Router to the Internet.
Solution:
If the Setup Assistant is not able to connect the Router to the
Internet, please check the following items:
1
. Use the troubleshooting suggestions within the Setup Assistant.
2
. If your ISP requires a user name and password, make sure that
you have typed in your user name and password correctly.
Some user names require that the ISP’s domain may be at
the end of the name. Example: “[email protected]”. The
“@myisp.com” part of the user name may need to be typed as
well as your user name.
If you continue to have no Internet connection, reference the
section titled “Manually Configuring Network Settings” (page xx of
this User Manual for an alternative setup method).
Problem:
• The Setup Assistant completed installation, but my web browser
doesn’t work.
• I am unable to connect to the Internet. The “ADSL” LED on my
Router is off, and the “Internet” LED is blinking.
Solution:
If you cannot connect to the Internet, and the “ADSL” LED is off,